First check the Product Repair List https://www.tear-aid.nl/en/usage-guidelines/
to see if you need type A or type B. Before proceeding make sure surface is completely dry. Keep Tear-Aid out of children’s reach.
Tears and holes in the centre of the material:
- Use the alcohol patch to clean the surrounding material. Before proceeding make sure surface is completely dry.
- Trim the Tear-Aid patch to the preferred size. For optimal attachement the patch needs at least 2,5 cm of coverage on both sides of the tear.
- Preferably use rounded edges.
- Gently tear off about 1 cm. of the protecting paper on the back of the patch. Stretch the patch a little to tear the paper.
- Position the damaged material.
- Apply the exposed adhesive side of the patch. Remove the rest of the protecting paper while in the mean time applying the rest of the patch to cover the tear.
- Press the patch firmly.
Tears and holes on the edge of the material:
- Use the alcohol patch to clean the surrounding material. Before proceeding make sure surface is completely dry.
- Trim the Tear-Aid patch to the preferred size. For optimal attachement the patch needs at least 2,5 cm of coverage on both sides of the tear.
- Apply the patch on the outside of the material and turn the material around.
- Place the nylon string across the tear, it will provide reinforcement.
- Fold the remaining part of the patch over the edge.
- Apply a secondary patch on the other side of the material.
- Press firmly and cut any the remaining pieces of nylon string.
Producer: Two-M v.o.f. , NL-3862 DG Nijkerk, Sparreboomstraat 10, the Netherlands, +31-813-948-6898
Origin: Netherlands
